文章摘要
张梦雅,万淇通,张云飞,邴丽娜* ,沈振江*.Fe2O3掺杂非纳米TiO2的制备及其光催化性能[J].海南师范大学学报自科版,2023,36(4):393-399
Fe2O3掺杂非纳米TiO2的制备及其光催化性能
Preparation and Photocatalytic Performance of Non-nano TiO2Doped with Fe2O3
  
DOI:10.12051/j.issn.1674-4942.2023.04.006
中文关键词: 二氧化钛  Fe2O3掺杂  光催化
英文关键词: titanium dioxide  Fe2O3 doping  photocatalysis
基金项目:海南省自然科学基金项目(521QN240,220RC595);国家自然科学基金项目(11304069);海南师范大学物理学 学科建设经费
作者单位
张梦雅,万淇通,张云飞,邴丽娜* ,沈振江* 海南师范大学 物理与电子工程学院海南 海口 571158 
摘要点击次数: 340
全文下载次数: 134
中文摘要:
      为改善光催化剂二氧化钛的催化性能,采用固相法制备二氧化钛/氧化铁复合光催化剂。 利用SEM、XRD、紫外分光光度计测试对该光催化剂进行表征,将亚甲基蓝作为目标反应物探究制备 的光催化剂的光催化性能和保温温度、掺杂量、升温速率的最佳制备条件。制备出的光催化剂在保 温温度为500 ℃、掺杂离子浓度为1%、升温速率为8 ℃/min时光催化效果最好,降解率达到93.1%。 相较于未经处理的二氧化钛(82.7%)有了提升。且相较于在液体体系中处于弥散状态的二氧化钛, 制备的催化剂表现出在45~60 min左右会沉淀在液体底部,为收集利用提供了可能性。
英文摘要:
      In order to improve the catalytic performance of photocatalyst titanium dioxide, titanium dioxide/iron oxide com⁃ posite photocatalyst was prepared by solid phase method. The photocatalyst was characterized by SEM, XRD and UV spec⁃ trophotometer tests. Methylene blue was used as the target reactant to explore the photocatalytic performance of the pre⁃ pared photocatalyst and the optimum preparation conditions of the temperature, doping ion concentration and heating rate. The prepared photocatalyst had the best effect when the holding temperature was 500 ℃, the doping ion concentration was 1%, and the heating rate was 8℃/min, reaching 93.1%. Compared with 82.7% of untreated titanium dioxide, it had been im⁃ proved. Compared with titanium dioxide in the dispersion state in the liquid system, the prepared catalyst showed that it precipitated at the bottom of the liquid in about 45~60 minutes, providing the possibility for collection and utilization.
查看全文   查看/发表评论  下载PDF阅读器
关闭